Hey,
Reset Belkin range extender
Find the circular button marked “Reset” on the back of your Extender.
Use a pin or paperclip and press the “Reset” button.
Hold the “Reset” button down for 10-15 seconds & see all light flashing on the extender.
Release the Reset button & Reboot the range extender.
For further information you can visit our website:
To reset, you will need to hold in the reset button using a pin, nail or other pointed object, for 45 seconds until the blue light stays on for a few seconds straight.
You then connect directly to the new WIFI SSID named ‘Belkin.setup’.
Then open your browser and use the IP address http://192.168.206.1 option which can be verified in the WIFI properties under DNS server IP.
When you are ready, press ‘Start’
And continue the prompts, entering the connection details for you the router you are extending
You then configure your extender with the WIFI SSID and password for the WIFI routers range you want extended.
Once changes are committed, disconnect from ‘Belkin.setup’ SSID. Disconnection should happen automatically.
Now connect to your normal WIFI.
Your pc, phone, xbox, tv or other internet connected device will auto connect via the Belkin extender if the signal from the extender is louder than your WIFI router.
This May Help,
Peter